Methods of Improving the Processing Efficiency of Laser Cutting Equipment

Author:
Source:
Date: 2017-08-14

Methods of Improving the Processing Efficiency of Laser Cutting EquipmentWe are in the use of the corresponding laser cutting machine to work, for how to quickly improve the efficiency of the relevant aspects, which requires us to think about a lot of now for the level of technological progress, which for the relevant laser cutting technology But also for the great improvement, especially for the relevant metal laser cutting machine, fiber laser cutting machine and other equipment is widely used, is a lot of business essential products.


How does the laser cutting machine improve the efficiency of the work?


First of all we have to understand is the use of laser equipment is mainly used to irradiate the surface of the steel beam and the release of energy to see the steel plate to melt and evaporate, because the energy can be a high degree of concentration can be a rapid local heating, so that the plate evaporates, Only a small amount of steel to reach other parts, basically will not cause any deformation, the use of laser can produce complex shape of the workpiece, the cutting of the workpiece does not need to be the next step can be used directly.

To know that the use of the relevant laser cutting machine to cut, then there are three major advantages: cutting quality, processing speed, clean, safe, pollution-free, in the production of laser cutting machine power is certain, so to Can improve the efficiency, you need to control the people.

Here for the new machine learning and manipulation to remind you about the operation process, the operator needs through the daily production, in the usual work process to strengthen the machine performance learning and skills proficiency. Work alternative exercises, spare time to strengthen the knowledge of all aspects of the machine learning, so that meet the machine can solve a small problem, there are big problems to know where the problem appears and to help solve the problem.

Note that you can choose to modify the CNC laser cutting machine program, because for the CNC laser cutting machine, it will make changes to its procedures, the use of straight-line mode, will be set to point in the arc, cut down the arc Section is very smooth and smooth, to ensure the quality of parts.

Finally, the optimization of the discharge plan is mainly through consultation with the workshop and the technical department, the use of two beams to share a common side of the method of cutting, which does not affect the cutting effect, so the efficiency is artificially improved The

Information for the Hongshan laser finishing release please specify http://www.cxjg.cn/ laser cutting machine


Related recommendation / 热点新闻
2017 - 08 - 13
点击次数: 104
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing a...
2017 - 08 - 13
点击次数: 19
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians an...
2017 - 08 - 13
点击次数: 17
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive ...
2017 - 08 - 13
点击次数: 9
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost...
2017 - 08 - 13
点击次数: 5
As for the quality identification of laser cutting machine, the following methods are mainly carried out. In the laser cutting machine equipment, the radiation of laser cutting machine, which is calle...
2017 - 08 - 13
点击次数: 5
Wuhan Chang tech micro channel public opening number, welcome to open the WeChat sweep to add Changxin official WeChat hotline: 13317147426
2017 - 08 - 13
点击次数: 1
Because of the different development of industry, the industrial field of laser processing system is different. The United States, Japan is a very common application processing country, South Korea is...
2017 - 08 - 13
点击次数: 7
General laser equipment is commonly used in our processing and production.At present, laser equipment is also used in the commercial industry. Architectural models are widely used in commercial a...
2017 - 08 - 13
点击次数: 2
At present, the market of various types of laser marking machine Ling Lang everywhere, and the price difference is also a lot of difference, what can I do to get practical and affordable marking machi...
2017 - 08 - 13
点击次数: 2
Metal laser cutting machine is now the main use of the mechanical processing equipment, laser cutting machine is a kind of effective tool for metal processing, has been widely welcomed by the market, ...
Contact Us
  • cxlaser
  • info@cxlaser.cn
  • 86 27 5927 7828
  • Plant 5, Free Trade Zone, No. 777, Guanggu 3rd Road, East Lake High-Tech Economic Development District, Wuhan, Hubei, China
Copyright ©2006 - 2028 武汉畅新科技发展有限公司
犀牛云提供企业云服务
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 0086-27-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

展开