Performance explanation of metal laser cutter voltage regulator

Author:
Source:
Date: 2017-08-13


Metal laser cutting machine on the stability of power supply system requirements is relatively high, but with the development of industry, the pollution of power supply is becoming more and more serious, more or less affected by interference voltage surge, these disturbances may be due to the operation of industrial equipment and power supply quality is caused, the manifestation is: the change of voltage fluctuated and transient mutation. To make the metal laser cutting machine work properly, the use of AC voltage regulator is a good choice. What is the performance of metal laser cutter voltage regulator? Now let's get to the bottom of it.

 The performance of metal laser cutter voltage regulator is as follows:

 1. Voltage regulation accuracy:   1%~   5%, adjustable output voltage adjustment range:   10V4, no additional waveform distortion, no phase shift. 

3, input voltage: three-phase 380V   25%, single-phase 220V   25%, frequency 47~60HZ2, output voltage: three-phase 380V, single-phase 220V (can be set as required).

 5, the efficiency is more than 98%, the insulation level of the transformer of H level.

6, response time.

7, according to user needs, in the output voltage regulator can be installed in different types of autotransformer or isolation transformer, to provide users with various types of stable voltage, to meet the needs of different types of machine tools.

 8 、 can work continuously for a long time, and can bear short-time overload. 

9 、 with over-voltage, over-current and other automatic protection function.

 10, working environment: temperature -10, ~ 40, relative humidity. 

11, can be used for any nature of the load (resistance, sensibility, capacitive). 

12, additional automatic startup function (after over-voltage trip, when the city power restored to the voltage range and after the city power failure again call, the machine is automatically switched on). 

13, add double delay mechanism (boot delay output, overvoltage delay shutdown, eliminating instantaneous impact). 

14, adding phase protection function. If you have a problem with the laser cutting machine, please contact the new laser for the first time and solve it in 24 hours


Related recommendation / 热点新闻
2017 - 08 - 13
点击次数: 104
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing a...
2017 - 08 - 13
点击次数: 19
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians an...
2017 - 08 - 13
点击次数: 17
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive ...
2017 - 08 - 13
点击次数: 9
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost...
2017 - 08 - 13
点击次数: 5
As for the quality identification of laser cutting machine, the following methods are mainly carried out. In the laser cutting machine equipment, the radiation of laser cutting machine, which is calle...
2017 - 08 - 13
点击次数: 5
Wuhan Chang tech micro channel public opening number, welcome to open the WeChat sweep to add Changxin official WeChat hotline: 13317147426
2017 - 08 - 13
点击次数: 1
Because of the different development of industry, the industrial field of laser processing system is different. The United States, Japan is a very common application processing country, South Korea is...
2017 - 08 - 13
点击次数: 7
General laser equipment is commonly used in our processing and production.At present, laser equipment is also used in the commercial industry. Architectural models are widely used in commercial a...
2017 - 08 - 13
点击次数: 2
At present, the market of various types of laser marking machine Ling Lang everywhere, and the price difference is also a lot of difference, what can I do to get practical and affordable marking machi...
2017 - 08 - 13
点击次数: 2
Metal laser cutting machine is now the main use of the mechanical processing equipment, laser cutting machine is a kind of effective tool for metal processing, has been widely welcomed by the market, ...
Contact Us
  • cxlaser
  • info@cxlaser.cn
  • 86 27 5927 7828
  • Plant 5, Free Trade Zone, No. 777, Guanggu 3rd Road, East Lake High-Tech Economic Development District, Wuhan, Hubei, China
Copyright ©2006 - 2028 武汉畅新科技发展有限公司
犀牛云提供企业云服务
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 0086-27-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

展开