NEWS
For the laser cutting machine, is already a few decades of history, the domestic are constantly studying new technologies, hoping to continue to update in the new technology. Laser cutting technology and equipment, is now being used by many sheet metal processing enterprises, and its processing efficiency, high precision machining, cutting cross-section of good quality, can be three-dimensional cutting processing and so on the advantages of occupation of sheet processing market, also began to replace Our traditional plasma cutting, water cutting, flame cutting, CNC punching technology.  &...
发布时间: 2017 - 08 - 14
浏览次数:1
Laser marking is a kind of laser processing, the use of high-energy density of the laser, the surface of the workpiece burning etched a permanent text or pattern.Laser marking machine classification and selection:According to different materials, different wavelengths of laser absorption of different characteristics, the general laser marking machine is divided into two categories, one is the use of YAG laser, suitable for processing metal materials and most of the non-metallic materials, such as iron, copper , Aluminum, gold, silver and other metals and various types of alloys, as well as ABS...
发布时间: 2017 - 08 - 14
浏览次数:3
Fiber laser cutting machine is a laser cutting machine using a fiber laser generator as a light source.      Fiber laser is a new international development of a new type of fiber laser output high energy density of the laser beam, and gathered in the workpiece surface, so that the workpiece is ultra-fine focus spot irradiation area instantly melting and gasification, through the CNC mechanical system to move the spot The position is cut to achieve automatic cutting. Compared with the large volume of gas lasers and solid-state lasers, it has become an important candidate in the f...
发布时间: 2017 - 08 - 14
浏览次数:2
First talk about the role of cooling water for the Q head. The Q head is a part of the laser processing. Its temperature at work is also a bit high. Generally an instant waterless work for the Q head or made a failure to burn the fault. But if the Q head for a long time without water work (usually within 3 seconds) the situation then Q head is also very easy to burn out. If the Q head burned down is also a loss of thousands of pieces. Followed by talk about the cooling water is not pure on the impact of laser marking machine. Cooling water is impure that cooling water application for a long ti...
发布时间: 2017 - 08 - 14
浏览次数:1
Semiconductor lasers are semiconductors as a working material of the laser, due to differences in material structure, different types of laser specific process is rather special. Commonly used working materials are gallium arsenide (GaAs), cadmium sulfide (CdS), indium phosphide (InP), zinc sulfide (ZnS) and so on. There are three kinds of incentive modes: electric injection, electron beam excitation and optical pumping. Semiconductor laser devices can be divided into homogeneous junctions, single heterojunctions, double heterojunctions and so on. Homogeneous junction lasers and single heteroj...
发布时间: 2017 - 08 - 14
浏览次数:1
Usually the rotor of the motor is a permanent magnet, and when the current flows through the stator winding, the stator winding produces a vector magnetic field. The magnetic field will drive the rotor to rotate at an angle so that the direction of the pair of magnetic fields of the rotor coincides with the direction of the magnetic field of the stator. When the stator's vector magnetic field rotates an angle. The rotor also rotates with the magnetic field at an angle. Each time an electric pulse is input, the motor rotates one angle forward. The angular displacement of the output is proportio...
发布时间: 2017 - 08 - 14
浏览次数:2
Laser power according to the different ways can be divided into continuous laser power and pulse laser power supply 2 kinds. Continuous laser power supply Continuous laser power is a high-performance automatic ignition constant current power supply to fixed frequency widening the way to achieve high-precision constant current output. Output current ripple small, high stability. The ignition part adopts the three-stage freewheeling method of the series high-pressure package arc, the LC high-voltage relay and the low-voltage constant current to connect the arc current to cooperate with the ...
发布时间: 2017 - 08 - 14
浏览次数:2
The function of the linear guide of the laser cutting machine is guided and supported. In order to ensure that the machine has a higher processing accuracy, requiring its rails, straight line with a high degree of guidance accuracy and good sport stability. Laser cutting machine guide cleaning, it is recommended to clean once every two months, in the shutdown state of operation, cleaning to prepare dry cotton, lubricants. Engraving machine guide rail is divided into linear guide, roller guide, in the YM series X direction with a linear guide, Y direction with roller guide. Cleaning method: the...
发布时间: 2017 - 08 - 14
浏览次数:2
Laser marking machine is a low-power laser, its working principle is: the input graphics through the scanner or in the computer design their own graphics or text, in the computer management and control under the pattern of digital signal encoding (line and Field direction), and then digital-to-analog D / A conversion and analog-to-digital A / D conversion, and then amplified by the isolated power amplifier, the control unit into the motor to drive the mirror, according to the required direction of deflection, Leaving a very fine track This is the desired graphics.The following problems occur w...
发布时间: 2017 - 08 - 14
浏览次数:2
Laser equipment in the food industry in the application of packaging there are two. One is crossed, so that we tear the bag. Two are perforated on the bag. Everyone in the supermarket to buy things will see a lot of things on the packaging bags have holes, there is hanging so that the storage period is longer. Changxin laser on the focus on these two aspects!1. Laser scribing application    Laser scribing is a technique that uses a laser to achieve "easy to rip" effects on multilayer composite packaging materials. Traditional tools tend to draw too much of the line, resulti...
发布时间: 2017 - 08 - 14
浏览次数:1
On the advanced grassroots party organizations, outstanding party members in recognition of the resolutionWuhan Jianghan Economic Development Zone June 2012, Wuhan Jianghan Economic Development Zone on the recognition of advanced grassroots party organizations, outstanding party workers and outstanding communist party meeting in Wuhan Economic Development Zone Building 1 conference room grand opening. As the park many enterprises in the outstanding achievements of party work, my company was invited to attend. The main review of the meeting over the past year, the park's grassroots party o...
发布时间: 2017 - 08 - 14
浏览次数:3
April 22, held in Fujian Jinjiang in 2008 the tenth International Footwear Fair officially closed, the current shoe Expo attracted more than 500 exhibitors at home and abroad, more than 1,500 professional buyers to the procurement. The same time asThere are two booths in China, including many buyers from home and abroad, mainly from: Egypt, South Africa, Iran, Colombia, Pakistan, Indonesia, Madagascar, Syria, etc .; Mainland Fujian Province, such as Jinjiang, Quanzhou, lions Fuzhou, Xiamen, and Zhejiang, Shandong, Qingdao, Yunnan and so on.This shoe coincides with the best period of the 2008 O...
发布时间: 2017 - 08 - 14
浏览次数:2
Contact Us
  • cxlaser
  • info@cxlaser.cn
  • 86 27 5927 7828
  • Plant 5, Free Trade Zone, No. 777, Guanggu 3rd Road, East Lake High-Tech Economic Development District, Wuhan, Hubei, China
Copyright ©2006 - 2018 武汉畅新科技股份有限公司
犀牛云提供企业云服务
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 0086-27-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

展开