Service Line: 0086-27-59277828
Support & Service Service
Solution / Solutions More
Browse times: 76
Release time: 2017 - 08 - 12
Multifunctional laser cutting machine adopts mixed CO2 laser tube, while cutting for production of acrylic light boxes and thin sheet metal and other advertising material, advertising industry by the user's favorite, and at the same time, the device can be used for packaging industry cutting knife template production, the use of a machine, economic benefits.
How to debug the precision of laser cutting machine?
日期: 2017-08-12
浏览次数: 2


Three good debugging precision laser

 laser cutting machine cutting machine precision adjustment method: 1. focus laser light is transferred into the minimum time for an initial burst effect, the spot size to determine the effect of focal length, Changxin technology of laser spot to remind you as long as you look to the minimum time, then this is the best position the processing of focal length, and start working.

2.In the part before the laser cutting machine debugging, we can use some test, to determine the accuracy of workpiece scrap burst focal position, move up and down the laser head height, laser spot size will burst when there is a change of different sizes. Multiple adjustments are made to find the minimum spot position to determine the focal length and the optimum position of the laser head.

3. after the laser cutting machine is installed, a scribing device is arranged on the cutting mouth of the numerical control cutting machine, and a simulated cutting pattern is drawn by the marking device, and the square of the analog figure is 1m. Built in a diameter of 1m round, four corners were diagonal, after the end of the measuring tool to measure whether the circular circle and the square of the four sides tangent. The length of the diagonal of a square is 2 V (square root derived data about:1.41M) the axis of the circle should be equal to the side of the square, and the point at which the central axis intersects the two sides of the square to the square, the intersection point should be 0.5m. The cutting accuracy of the device can be determined by testing the distance between the diagonal and the intersection points.

About the laser cutting machine debugging problems, welcome to Wuhan Xin Chang science and Technology Development Co., ltd.! Product through train


Wuhan Changxin Science & Technology Development Co.,Ltd
Factory: Plant 5, Comprehensive Bonded Zone, No. 777, Guanggu 3rd Road, Donghu New Technological Development Area, Wuhan, Hubei, China (Mainland)
R & D sales center: 15F Tower A,Modern World Trade Center, No.70 Guanggu Ave,430223,Wuhan China
Copyright ©2006 - 2028 武汉畅新科技发展有限公司
WeChat sweep
Mobile phones sweep away
WeChat public account

QQ settings


SKYPE settings


Ali Wangwang settings




Telephone number management

  • 0086-27-85888025

Two-dimensional code management



online communication