Service Line: 0086-27-59277828
Supports Service
Solution / Solutions More
Browse times: 32
Release time: 2017 - 08 - 12
Multifunctional laser cutting machine adopts mixed CO2 laser tube, while cutting for production of acrylic light boxes and thin sheet metal and other advertising material, advertising industry by the user's favorite, and at the same time, the device can be used for packaging industry cutting knife template production, the use of a machine, economic benefits.
Service Common problem
Differences in lasers. YAG solid state laser cutting laser YAG crystal rod. CO2 high power laser - CO2 generator tube. Fiber laser cutting semiconductor pumped continuous mirror doped fiber. Plasma cutting machine - mixing gas with high frequency arc to make some gases "decompose" or ionize.
Release time: 2017 - 08 - 13
Browse times:2
1, check whether the sensor touch ash, bad or damaged (wipe the dust on the sensor or replacement); 2, check the flexible band data line is bad or damaged (trim data line re plug or replace the data line); 3, check the ground contact is reliable or power line damage (re grounding or replace the high-pressure line); 4, motor line is bad.?
Release time: 2017 - 08 - 13
Browse times:0
Carbon steel within 8mm, stainless steel within 6mm.
Release time: 2017 - 08 - 13
Browse times:1
Generally 2mm of the following materials can be used air. 2mm above stainless steel, usually with nitrogen, the effect is good, no paste edge. Carbon steel usually uses oxygen.
Release time: 2017 - 08 - 13
Browse times:1
Warranty for one year, except supplies. Lifetime maintenance, software upgrades. If the equipment fails, the after-sale personnel will be rushed to the scene within 1--2 days.
Release time: 2017 - 08 - 13
Browse times:0
When cleaning the lens, the lens must be very careful before cleaning, please note the following: 1. taking lenses must wear rubber gloves or fingerstall, because dirt and oil in the hands of drops of dirty lenses, cause performance degradation. 2. don't use any tools to pick up lenses, such as tweezers. 3. lenses should be placed on the lens paper to avoid damage. 4., do not put lenses on rough or hard surface, infrared lenses are easily scratched. 5. clean or touch the surface of pure gold or pure copper.
Release time: 2017 - 08 - 13
Browse times:0
The fundamental reason for the aging of laser tubes is that they are being used, such as people getting older, and their bodies are becoming worse and worse. Want to slow down aging, and slow down the aging of the people, should pay attention to maintenance, such as: 1, in the case of cutting requirements can be achieved, as far as possible to reduce the use of power. 2. Minimize the number of turns on and off of the laser. 3, non working time, turn off the laser. 4, as far as possible to ensure that the workplace temperature and humidity to meet equipment requirements. Use industrial circulat...
Release time: 2017 - 08 - 13
Browse times:1
Refrigeration system, operation table and control cabinet
Release time: 2017 - 08 - 13
Browse times:3
No, planes can only be cut
Release time: 2017 - 08 - 13
Browse times:2
No, just put it in the house
Release time: 2017 - 08 - 13
Browse times:3
1, check whether the normal focal length (re correction); 2, check the light is normal (re correction); 3, check plate on paper is too thick (re corrected);4, check whether parallel beams (regulation 5; both sides of the belt), check the lens is broken (replacement); 6, check the lens or a laser tube transmitter for contamination (re cleaning); 7, check the laser head or focusing mirror is loose (tightening); 8, the laser current intensity shall reach 8mA; 9, the aging of the laser tube (replacement);?
Release time: 2017 - 08 - 13
Browse times:2
Wuhan Changxin Technology Development Co., Ltd.
Factory: No. 5, No. 7, East and West Lake District, Wuhan, China
R & D sales center: 15F Tower A,Modern World Trade Center, No.70 Guanggu Ave,430223,Wuhan China
0086-27-59277828
info@cxlaser.cn
www.cxlaser.cn
Copyright ©2005 - 2017 Wuhan Changxin Technology Development Co., Ltd.
Rhino Cloud provides cloud computing services
[Links]
WeChat sweep
Mobile phones sweep away
WeChat public account
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 027-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

online communication