Service Line: 0086-27-59277828

News

News
Hot News / News
2017 - 08 - 13
点击次数: 19
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing a...
2017 - 08 - 13
点击次数: 2
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians an...
2017 - 08 - 13
点击次数: 4
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive ...
2017 - 08 - 13
点击次数: 2
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost...
2017 - 08 - 13
点击次数: 1
As for the quality identification of laser cutting machine, the following methods are mainly carried out. In the laser cutting machine equipment, the radiation of laser cutting machine, which is calle...
Solution / Solutions More
Browse times: 32
Release time: 2017 - 08 - 12
Multifunctional laser cutting machine adopts mixed CO2 laser tube, while cutting for production of acrylic light boxes and thin sheet metal and other advertising material, advertising industry by the user's favorite, and at the same time, the device can be used for packaging industry cutting knife template production, the use of a machine, economic benefits.

How to properly use laser cutting cuffs

Date: 2017-08-14
Browse: 1

Set the outer boundary to the line position. In general, this is the connection between the thermal deformation and the direction of the outside. In the case where the cutting start position is assumed to be the lower left, the outer boundary of the outer lead is located at the lower right, and the position of the cutting position of the laser cutting machine is where the position of the outer boundary is introduced as the click change parameter, And the distance between the whole machine (usually 1 times the size of the cut seam size), determine the public side of the public side of the nest material, certainly loaded / turned the size of the board, load the machine and the machine as of the arrangement; output NC; Inspection, inspection of the whole machine cutting point and walking line.


 It must be sent to the laser cutting machine platform as of the cut; in the machine must be decided before loading the public side of the nest material, otherwise there will be no co-edge; change the set file in the example of the reduction of perforation options, to re- To the public side of the nest material as of the decision; in the use of co-edge of the calendar to pay attention to; the introduction of the location of the line and the future generated by the direction of walking and thermal deformation associated.


First, enable NEST software;


Second, set the outer boundary of the introduction line location. (In general, this is the relationship between the thermal deformation and the direction of the outside movement. About assuming that the starting position of the cut is {bottom left}, the outer boundary of the introduction of the line position is {lower right}, the cutting position where the starting position Is {lower right}, then the outer boundary is the place where the line is {top}


Three, click 【change board parameters】, set the machine and the distance between the machine] (usually 1 times the size of the cut seam size), determine the [public side] in the [public side sets of material], certainly loaded / Illusion of sheet size, load the whole machine and the machine as of the arrangement;


Four, output NC;


5, check, check the edge of the whole machine cutting point and walking line. Certainly correct, it may be sent to the laser cutting machine platform cut off;


Six, before loading the machine must decide [public side sets of materials], otherwise there will be no common side;


Related News / 推荐新闻 More
2017 - 08 - 13
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing and service for customers as a whole, and has completely independent intellectual property rights and advantages of integration in the field of control system, optical system, electrical system, mechan...
2017 - 08 - 13
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians and other personnel changes bring trouble, reduce the labor cost, material cost, improve production and management ability. The automobile seat cutting cutting machine features: 1, select import co...
2017 - 08 - 13
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive products industry in North China, the most cost-effective industry exhibition, but also the largest in East China, the highest grade, the most influential auto supplies industry event. The Wuhan ...
2017 - 08 - 13
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost, mature technology and optical fiber can be miniaturized, the Rao of the intensive advantage;(2) the glass fiber does not require strict crystal like as the phase matching of the incident pump, this ...
Wuhan Changxin Technology Development Co., Ltd.
Factory: No. 5, No. 7, East and West Lake District, Wuhan, China
R & D sales center: 15F Tower A,Modern World Trade Center, No.70 Guanggu Ave,430223,Wuhan China
0086-27-59277828
info@cxlaser.cn
www.cxlaser.cn
Copyright ©2005 - 2017 Wuhan Changxin Technology Development Co., Ltd.
Rhino Cloud provides cloud computing services
[Links]
WeChat sweep
Mobile phones sweep away
WeChat public account
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 027-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

online communication