Service Line: 0086-27-59277828

News

News
Hot News / News
2017 - 08 - 13
点击次数: 16
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing a...
2017 - 08 - 13
点击次数: 2
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians an...
2017 - 08 - 13
点击次数: 4
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive ...
2017 - 08 - 13
点击次数: 0
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost...
2017 - 08 - 13
点击次数: 1
As for the quality identification of laser cutting machine, the following methods are mainly carried out. In the laser cutting machine equipment, the radiation of laser cutting machine, which is calle...
Solution / Solutions More
Browse times: 32
Release time: 2017 - 08 - 12
Multifunctional laser cutting machine adopts mixed CO2 laser tube, while cutting for production of acrylic light boxes and thin sheet metal and other advertising material, advertising industry by the user's favorite, and at the same time, the device can be used for packaging industry cutting knife template production, the use of a machine, economic benefits.

Compared to other cutting machines, the advantages of laser cutting machine

Date: 2017-08-14
Browse: 1

With the recognition of the laser, the scientific development has made new improvements, laser cutting machine is now using a very wide range of mechanical equipment, to create a new laser cutting machine, then the laser cutting machine and other cutting machine phase Comparison, where is its advantage?


Compared with other thermal cutting methods, the same as the thermal cutting process, other methods can not act like a laser beam in a very small area, resulting in incision wide, heat affected area large and obvious deformation of the workpiece. Laser cutting machine can cut metal, non-metallic. Die


Mass production of molds with low cost, short production cycle. But its adaptability to changes in design is poor, new molds require long-term design, high cost, medium and small scale production, the characteristics of laser cutting will be fully displayed. In addition, the laser program-controlled cutting to facilitate the workpiece closely arranged, saving materials, and die is required to reserve materials around each workpiece.

Sawing.

Cutting thin metal, the speed is significantly slower than laser cutting, and the laser as a flexible non-contact, profiling tool can be cut from any point of the material in any direction. This is something that sawing is hard to do.

Electrical processing.

In general, there are two methods of EDM and electrochemical processing using electric corrosion or melting effect. For fine machining of hard materials, the cut roughness is better, but the cutting speed is several orders of magnitude slower than that of laser cutting machine.

Water cut.

Can cut many metal materials, but the cost is high.


Related News / 推荐新闻 More
2017 - 08 - 13
Changxin laser has been committed to the research and application of laser technology based on automotive interior carpet processing industry, is committed to providing a full range of manufacturing and service for customers as a whole, and has completely independent intellectual property rights and advantages of integration in the field of control system, optical system, electrical system, mechan...
2017 - 08 - 13
Wuhan Changxin technology automotive interior laser equipment -- to help you enhance the information management and automation level; master version of core technology design; deal with technicians and other personnel changes bring trouble, reduce the labor cost, material cost, improve production and management ability. The automobile seat cutting cutting machine features: 1, select import co...
2017 - 08 - 13
August 2014 22-24 three days of Chinese automotive supplies fall Huineng orders will be held at the Qujiang International Convention and Exhibition Center in Xi'an. The show is the leading automotive products industry in North China, the most cost-effective industry exhibition, but also the largest in East China, the highest grade, the most influential auto supplies industry event. The Wuhan ...
2017 - 08 - 13
Changxin laser marking machine is not only the greatest advantage in terms of speed, but also has the following advantages of Changxin laser marking machine (1) glass fiber manufacturing low cost, mature technology and optical fiber can be miniaturized, the Rao of the intensive advantage;(2) the glass fiber does not require strict crystal like as the phase matching of the incident pump, this ...
Wuhan Changxin Technology Development Co., Ltd.
Factory: No. 5, No. 7, East and West Lake District, Wuhan, China
R & D sales center: 15F Tower A,Modern World Trade Center, No.70 Guanggu Ave,430223,Wuhan China
0086-27-59277828
info@cxlaser.cn
www.cxlaser.cn
Copyright ©2005 - 2017 Wuhan Changxin Technology Development Co., Ltd.
Rhino Cloud provides cloud computing services
[Links]
WeChat sweep
Mobile phones sweep away
WeChat public account
X
1

QQ settings

3

SKYPE settings

4

Ali Wangwang settings

等待加载动态数据...

等待加载动态数据...

5

Telephone number management

  • 027-85888025
6

Two-dimensional code management

等待加载动态数据...

等待加载动态数据...

online communication